New !! LARKEN 48/96 Canuck CNC Router

4896cnc
  • Sign Routing 
  • WoodWorking 
  • Plastic cutting
  • 3D Modeling 
  • Educational Applications 
  • StarCam Windows Controller
  • 3D Digitizer ready
  • 240 in/min feed rate
  • Laser Option

The Canuck CNC comes standard with a 2 Hp Bosch Variable Speed Router, with optional 3Hp Spindle

Canuck 4896 Price $15995 ($Can)

Canuck 4848 Price $14995 ($Can)

>> BUILT HERE IN OTTAWA CANADA <<

2 year warantee on Electronics , 1 year on spindle and mechanical

All systems come ready to run with StarCam software, 3 axis controller, dust pickup ,hold-down clamps and spindle

Precision Quality Construction

Precision Thompson Linear bearings are on all axes. These recirculating ball bearings are extremely accurate and rugged. They guarantee very accurate reliable positioning and excellent cut quality. The hardened rails are bolted to the frame all along their length.

The 48/96 uses a Sturdy Welded Steel Frame . It has Japaneese Nippon linear bearings and USA made rails on X ,Y . ( no cheap inferior chinese bearings like used on hobby cnc )

Zero-backlash Rack/Pinion drive allows high cuting speeds . Powerful 400 oz/in XYZ stepper motors provide superior speed and cutting power.

A Profitable Investment

The possibilities for profit and new products are limited only by your imagination. The 48/96 Canuck can be used for so many different types of jobs it can pay for itself in a very short time.

 The Canuck CNC can be used to Route, Engrave, 3D mill or plot all types of materials including plastic, acrylic, MDF, wood, composites, brass and aluminium. A 2 hp variable speed Boschrouter is standard with an optional 2.7 hp Italian spindle or 3Hp chinese watercooled spindle

The table on the Canuck features Tslot hold down bars every 24" with replaceable table section in between . 4 aluminum hold down Clamps are included .

cnc
gantry

Perfect for Complex Graphics

With the 4896 you can easily do complex jobs that you would have previously thought too difficult or time consuming, such as inlaying metal into wood or cutting out elaborate graphic shapes .

Advanced contouring at cutting speeds up to 240 in/min lets you cut complex graphics with curves and arcs smoothly and accurately. With its computer controlled 5 " z axis clearance and 6" stroke , the Canuck can cut thick materials such as wood or foam board using the multi-pass mode. With our StarCam for Windows controller software you can specify maximum depth per pass, whether or not you require a finish pass, cutting speed and finish pass speed. Our Starcam is the one of the easiest to use CNC controller in the industry !

 The Canuck can engrave tiny letters smaller than .050" or cut signs 50" wide by any length in long sign mode .

Options like 3D Digitizer probe for bringing 3d shapes into your Cadcam program with DXF..and Laser engraving and marking with the 15 watt solid state laser option . Gray scale engraving is easy using our StarCam layout program. You can mix Laser engraving and Routing in the same file and it will automatically cut both operations together in the same job.

probe

Canuck 48/96 and 48/48 Specifications

XY travel 50" x 98 " ( 50" x 50" on 48/48 )
Z travel 8 standard,
Z Clearance 5.75" gantry clearance
Table Width Table width 51" ... Machine gantry width 65
Table Length 110"... ( 64" on 48/48)
XYZ Resolution 0.0005"
Repeatability + - 0.002" , machined straight gantry for accurate squareness
Spindle type 2 Hp Bosch 1617EVS router (std), Hign frequency spindle optional
Maximum cutting speed 240 in/min stepper
Rapid Taverse speed 300 in/min
Homoe switches Home switches on XYZ . Limit switches on XY axes with upper limit on Z axis
Control type Windows StarCam 32bit USB 3 axis controller, MicroStep Stepper motor drives.
Table Material Welded Steel frame , with Tslot bars every 24 "
Shipping weight 1200 Lb
Power requirer 120 volt 15 amps (optional 220V 50 Hz)
Computer required I5 core 2500 minimum 8 gig ram with Windows 10

Canuck 4848 and 4896 Options

3D digitizer probe attachment
15 watt Laser for gray scale engraving
2.0Kw (2.7Hp) Teknomotor Italian router spindle with 220V Hitachi inverter
Dual Z heads
Single or dual Pnematic Side Drills
 
 
 

 

LARKEN AUTOMATION

 

Visit counter For Websites